Order the right size cable for your job.Open
CABLE MANAGEMENT USING RFID TECHNOLOGY
Imagine a system where you can see an accurate cable inventory report showing what cable went out on a job site and what cable actually came back without increased manual labor and hours.
- Increase the accuracy of your billing
- Reduce the labor hours required for inventory (one scan can capture an entire skid)
- Use one single system for new and existing inventory
- RFID tag is embedded in the connector to minimize damage
- Provides live data immediately after inventory is scanned
For more information about RFID Technology, please call:
The total resistance offered by a device in an alternating current circuit due to the inductive and capacitive effects, as well as the direct current resistance.
A measure of the current carrying ability of a conductor, in amps.
It is important not to exceed the ampacity of a given conductor to avoid damage to the conductor.
Abbreviation for American Wire Gauge. Based on a circular mil system. 1 mil equals .001 inch.
The first component in drawing copper conductors, commonly available as 5/16 inch rod.
An electric current which flows in only one direction.
A rubber-like substance
Refers to the copper conductor size, according to the American Wire Gauge, based on the conductor’s circular mil area. Gauge numbers decrease as wire size increases, e.g. #8 is smaller than #6, etc.
Refers to the insulation extruded around the copper conductor.
EPDM: Ethylene Propylene Diene Monomer, a synthetic rubber jacket. Flex-A-Prene® is our brand name for our EPDM jacketed cable.
TPE: ThermoPlastic Elastomer, a plastic jacket.
National Electrical Manufacturer’s Association, the leading trade association in the U.S. representing the interests of electroindustry manufacturers of products used in the generation, transmission and distribution, control, and end-use of electricity.
Unit of resistance such as a constant current of one ampere produces a force of one volt.
Society of Automotive Engineers, dedicated to advancing the engineering of mobility systems. SAE maintains technical standards for automotive engineering.
Junior hard service thermoplastic or rubber-insulated conductors with overall thermoplastic jacket. 300V. 60C to 105C.
Service cord with oil resistant jacket, oil resistant insulation and weather resistant. Also water resistant. 600V.
A unit of electrical pressure. One volt is the amount of pressure that will cause one ampere of current in one ohm of resistance.
An irreversible process during which a rubber or polymeric compound through a change in its chemical structure (for example, crosslinking) become thermoset.
A unit of electrical power. One watt is equivalent to the power represented by one ampere of current under a pressure of one volt in a DC circuit.